How Does Total Internal Reflection Work at a Boundary?

By Julia Berens · · 4 min read

A glowing pink and violet nebula with wispy dust and bright blue-white stars stands out against a black star field.

How does total internal reflection work? Imagine two rays hitting the same glass-air boundary from inside the glass. The first heads almost straight at the surface, and some of its light passes into the air. The second approaches at a shallow angle to the surface, and all of its light reflects back into the glass if the boundary is ideal. The glass and air are the same in both cases. What changes is the ray’s direction relative to the surface.

How does total internal reflection work in a ray diagram?

Draw a straight horizontal line for the boundary, with glass below and air above. Pick a point on the line and draw a vertical line through it. The vertical line is the normal, which is perpendicular to the surface. The angle of incidence is the angle between the incoming ray and the normal, not between the ray and the surface.

Each panel below shows a separate trial. In each one, the incoming ray travels up and to the right toward the dot. The sketches are not to scale. The first panel leaves out the partial reflection so the transmitted ray is easier to see.

Below critical     At critical        Above critical

AIR     |  __→          |                  |
        | /             |                  |
--------●------  -------●------→   --------●--------
       ↗|            ↗  |              ↗   |   ↘
GLASS   |               |                  |

In the first panel, the ray that enters the air bends away from the normal. As you make the incoming ray more nearly parallel to the surface, the transmitted ray tilts farther from the normal. At the critical angle, the transmitted direction is exactly along the surface, 90° from the normal. Increase the incidence angle any further and there is no propagating ray into the air. The reflected ray stays in the glass, making the same angle with the normal as the incoming ray.

Two checks before you calculate

Check which side the ray starts on. A material’s refractive index, written n, is the speed of light in vacuum divided by its speed in the material. Total internal reflection can happen only when the ray approaches the boundary from the higher-index side. At a glass-air boundary, that means the ray must start in the glass. Reverse the direction of travel across the boundary, so the ray starts in air and aims into glass, and the transmitted ray bends toward the normal instead. There is no critical angle for that direction.

Check what your angle is measured from. A ray traveling 20° above a flat surface makes a 70° angle with the normal. For a ray inside glass with a critical angle of about 42° at a glass-air boundary, 70° means total internal reflection. If you mistakenly use 20° as the incidence angle, you predict that some light escapes. Marking the normal before writing down any angles prevents that error.

Finding the critical angle with Snell’s law

Snell’s law relates the two angles: n1 sin θ1 = n2 sin θ2. The subscript 1 labels the side the ray comes from, and 2 labels the other side. Both angles are measured from the normal. At the critical angle, θ2 is 90°, so its sine is 1. That gives sin θc = n2/n1, where θc is the critical angle.

Use 1.50 for the index of a sample of glass and 1.00 as an approximation for air. The ratio is 1.00/1.50, or about 0.667. In degree mode, the inverse sine gives about 41.8°. At a 30° incidence angle, Snell’s law gives a sine of 0.75 for the transmitted angle, so the transmitted ray makes an angle of about 49° with the normal. At 50° incidence, the law would require a sine of about 1.15. No real angle has that sine. That is how the calculation tells you there is no refracted ray traveling into the air. OpenStax’s explanation of total internal reflection shows the same reasoning for other materials.

From a single boundary to an optical fiber

An optical fiber has a central core surrounded by cladding with a slightly lower refractive index. A ray can enter through the end face and travel down the core. When it reaches the side of the core, it meets a different boundary: core against cladding, not glass against air. If its incidence angle there exceeds the critical angle for that pair of materials, it reflects back into the core. In a simple side view of a straight fiber, a ray crossing the core repeatedly traces a zigzag.

Here is the angle distinction that makes the fiber diagram useful: a ray that travels nearly along the fiber axis strikes the side wall at a large angle to the normal. In a lengthwise sketch with horizontal walls, the axis is horizontal and the wall normal is vertical. A ray aimed more steeply across the core makes a smaller angle with that normal and can send some light into the cladding. That is why not every ray aimed into the end of a fiber will stay guided.

Test your diagram on a fiber

Draw a straight fiber as two parallel lines and use example indices of 1.48 for the core and 1.46 for the cladding. The critical angle is about 81° from the normal. Draw two rays already inside the core, one at 5° to the axis and the other at 15°, both in the plane of your sketch. At the side wall, their incidence angles are 85° and 75°. The first reflects entirely at an ideal boundary. For the second, draw both a reflected ray in the core and a refracted ray in the cladding. Put the refracted ray farther from the normal than the incoming ray.

For more diagram-based work, see IPhyC’s training and practice problems and Physics Explained articles.

Frequently asked questions

Do I measure the critical angle from the surface?

No. Measure it from the normal, the line perpendicular to the surface.

Can light totally reflect when it goes from air toward glass?

Not at an ordinary air-glass boundary. Total internal reflection requires the incident ray to start on the higher-index side.

Is 42° the critical angle for every optical fiber?

No. About 42° is the value for glass of index 1.50 against air. In a fiber, use the refractive indices of the core and cladding.